 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SPICE Device Model SI2337DS Vishay Siliconix P-Channel 80-V (D-S) MOSFET CHARACTERISTICS * P-Channel Vertical DMOS * Macro Model (Subcircuit Model) * Level 3 MOS * Apply for both Linear and Switching Application * Accurate over the -55 to 125C Temperature Range * Model the Gate Charge, Transient, and Diode Reverse Recovery Characteristics DESCRIPTION The attached spice model describes the typical electrical characteristics of the p-channel vertical DMOS. The subcircuit model is extracted and optimized over the -55 to 125C temperature ranges under the pulsed 0-V to 10-V gate drive. The saturated output impedance is best fit at the gate bias near the threshold voltage. A novel gate-to-drain feedback capacitance network is used to model the gate charge characteristics while avoiding convergence difficulties of the switched Cgd model. All model parameter values are optimized to provide a best fit to the measured electrical data and are not intended as an exact physical interpretation of the device. SUBCIRCUIT MODEL SCHEMATIC This document is intended as a SPICE modeling guideline and does not constitute a commercial product data sheet. Designers should refer to the appropriate data sheet of the same number for guaranteed specification limits. Document Number: 74139 S-52290Rev. A, 31-Oct-05 www.vishay.com 1 SPICE Device Model SI2337DS Vishay Siliconix SPECIFICATIONS (TJ = 25C UNLESS OTHERWISE NOTED) Parameter Static Gate Threshold Voltage On-State Drain Current a Symbol Test Condition Simulated Data 3.1 25 0.192 0.215 4 -0.74 Measured Data Unit VGS(th) ID(on) rDS(on) gfs VSD VDS = VGS, ID = -250 A VDS = -5 V, VGS = -10 V VGS = -10 V, ID = -1.2 A VGS = -6 V, ID = -1.1 A VDS = -15 V, ID = -1.2 A IS = -0.63 A V A 0.216 0.242 4.3 -0.80 S V Drain-Source On-State Resistancea Forward Transconductancea Diode Forward Voltagea Dynamic b Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge Gate-Source Charge Gate-Drain Charge Ciss Coss Crss Qg Qgs Qgd VDS = -40 V, VGS = -10 V, ID = -1.2 A VDS = -40 V, VGS = -6 V, ID = -1.2 A VDS = -40 V, VGS = 0 V, f = 1 MHz 636 39 25 10 6 2.1 3.2 500 40 25 11 7 2.1 3.2 nC pF Notes a. Pulse test; pulse width 300 s, duty cycle 2%. b. Guaranteed by design, not subject to production testing. www.vishay.com 2 Document Number: 74139 S-52290Rev. A, 31-Oct-05 SPICE Device Model SI2337DS Vishay Siliconix COMPARISON OF MODEL WITH MEASURED DATA (TJ=25C UNLESS OTHERWISE NOTED) Document Number: 74139 S-52290Rev. A, 31-Oct-05 www.vishay.com 3 |
Price & Availability of SI2337DS
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |